FPP PB16 Pixel Cont...
 
Notifications
Clear all

FPP PB16 Pixel Controller

630 Posts
62 Users
6 Reactions
389.5 K Views
rayhjr
Posts: 972
(@rayhjr)
Noble Member
Joined: 12 years ago

Since you like building things, how about the Pixel Radio found here.


Reply
Posts: 12
(@shawnd)
Active Member
Joined: 5 years ago

I looked throught the pixel radio and I can easily put it together, however what would be the benefit of this over the cheap Chinese $12 boards if all im looking for is audio output very close to my house? The cheapo board would easily fit inside my enclosure where the pixel radio it too large to fit inside my enclosure.


Reply
MartinMueller2003
Posts: 7613
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago
Shawnd wrote:I looked throught the pixel radio and I can easily put it together, however what would be the benefit of this over the cheap Chinese $12 boards if all im looking for is audio output very close to my house? The cheapo board would easily fit inside my enclosure where the pixel radio it too large to fit inside my enclosure.

it is all about diy and rds. mostly rds


Reply
rayhjr
Posts: 972
(@rayhjr)
Noble Member
Joined: 12 years ago

I just suggested it because it is something to build if you like building things like I do.
It would be a lot more money verses a simple board, the choice is yours.


Reply
Posts: 447
(@glycerine)
Honorable Member
Joined: 7 years ago

In reference to the "PI Zero to PB16 adapter" ( https://github.com/computergeek1507/PB_16/tree/master/PB16_2_PI )...

The raspberry pi zero has the same pinout as the raspberry pi 3 and 4, correct? So, if I wanted to use this adapter with a pi 4 instead of a zero, I could do so by using a ribbon cable between the pi 4 and the adapter, right?


Reply
Page 107 / 126
Share: