Last seen: Nov 19, 2026
KC, perhaps it is time to once again consider opening Vixen's source? It would probably make your life easier and allow more eyes to look over bugs.
Haha K.C. I asked you about 64-bit support back on Computer Christmas! Anyway, this is good. Now I can sequence on my desktop instead of loading up ...
Just thought I'd post that I've got two Renards at 115,200 running 128 channels at 25 ms timing and PWM enabled without a problem. This is coming str...
For a 5:30 to 11 time range, you need to use a DateTime object. void Start() { Off(All); DateTime now = DateTime.Now; //get the current tim...
One thing I do is to have the computer automatically reboot once a day. This clears whatever memory gunk has built up. Just set Vixen to automatical...
Are you strobing the LEDs or just flashing them quickly?
Will those strobes from christmaslightsshow stay under the amp rating on an SSROZ?
The copper tape from Stewart MacDonald is far cheaper and of higher quality than the copper foil or that stuff from Amazon.
I drilled out my own masonite board with at #9 bit and then put down copper tape. It goes pretty quickly. The copper tape is designed for shielding ...
I will pull my Renards and some lights out this weekend and give the faster speeds a try.
I've offered to port Vixen to Mono several times over the past few years that it has been developed. I think KC just doesn't wish to release the sour...
Vixen will not work in Vista x64 because KC used Fmod3 in Vixen. Fmod3 is not available in a 64-bit library. The only way you will get sound output ...
You should try installing XP onto one of those 98 machines. If you strip XP down to the bare minimum, it runs quite nicely on older hardware.
That is not my problem. My lights controllers sat under a tarp under a tree in my front lawn. My computer sat in the garage. A 100 ft CAT 5 cable f...
