wingrunr
@wingrunr
Trusted Member
Joined: Jul 15, 2007
Last seen: Nov 19, 2026
Topics: 5 / Replies: 82
Reply
RE: ESPixelStick - E1.31 WiFi Pixel Controller

From my reading it depends on the build and chipset. Recent builds disable on Broadcom and set to auto on Atheros. I'm planning on running some tests ...

10 years ago
Reply
RE: ESPixelStick - E1.31 WiFi Pixel Controller

Right. Realized that after it was pointed out the 802.11 layer was the culprit. I was thinking wired. I'm curious if setting ack timing to 0 on a dd-...

10 years ago
Reply
RE: ESPixelStick - E1.31 WiFi Pixel Controller

jchuchla wrote:It has nothing to do with e1.31. And it has nothing to do even with UDP vs TCP. This is an 802.11 wifi thing. It's not at the protoco...

10 years ago
Reply
RE: ESPixelStick - E1.31 WiFi Pixel Controller

Ok, so a few things: Your "unicast" is basically TCP. If e1.31 unicast is indeed implemented with no-ack, it uses optimistic delivery. That means the...

10 years ago
Reply
RE: ESPixelStick - E1.31 WiFi Pixel Controller

jchuchla wrote: Packets are going to drop just the same in either case, but on multicast, it doesn't stop to resend it. It just drops it and continu...

10 years ago
Reply
RE: ESPixelStick - E1.31 WiFi Pixel Controller

The ESPixelStick firmware reports current connection strength so no need to use a wifi analyzer on a phone (which will be rough anyway. Most new phone...

10 years ago
Reply
RE: ESPixelStick - E1.31 WiFi Pixel Controller

michaelc wrote:Has anyone experienced lag with the Espixelsticks? I was running fine and then tonight I noticed the Espixels were lagging, everything...

10 years ago
Reply
11 years ago
Forum
Reply
RE: Renard PX1 Pixel Controller - Group Buy "CLOSED"

Re: Renard PX1 Pixel Controller - Group Buy "OPEN" I'll take 4 PCBs. Payment sent. Accidentally put my forum name as "wingrunr21" instead of "wingru...

13 years ago
Forum
Reply
RE: New board design for the LedTriks

Hmm, what're you using to communicate with the computer? I've got a board I designed myself that is driven by an Arduino and talks to the computer vi...

17 years ago
Forum
Reply
RE: It wants to be 2.5 when it grows up

Phil, that's a very good idea. Perhaps some type of unit testing architecture? KC, I would be interested in hearing your thoughts on architecture ch...

17 years ago
Reply
RE: Error when bacground sequence turning off

Good post. I have been having this issue as well. I will try reverting back to 2.1.1.

17 years ago
Forum
Reply
RE: It wants to be 2.5 when it grows up

kjburns31 wrote:He didn't say that you didn't have a "Stake" in it, he said that you didn't have any "rights". Which you don't. Its clear that you ...

17 years ago
Reply
RE: It wants to be 2.5 when it grows up

teberle wrote:I disagree with this. I write software for a living and have been doing so for sometime. There have been many times that I have been t...

17 years ago
Reply
RE: It wants to be 2.5 when it grows up

aussiephil wrote:KC With so many more people using Vixen on so many different OS combinations there is bound to be some teething problems. I woul...

17 years ago
Page 1 / 6