Renard -> 115.2KBPS
 
Notifications
Clear all

Renard -> 115.2KBPS

94 Posts
22 Users
0 Reactions
39.5 K Views
Posts: 861
 xmus
Topic starter
(@xmus)
Noble Member
Joined: 19 years ago

Reddy_Kilowatt, good work! I just got back from interviews in Germany last night at midnight. We move in 6 weeks. I have NO TIME to work on this at the moment. Can I email you the "theory of operation" document? Could you add a chapter on how to do this with some suggestions for 232-485 converters that work etc?

please drop me an email at jaunemaillot at gmail d o t com

Thanks,
Dave


Reply
Reddy_Kilowatt
Posts: 547
(@reddy-kilowatt)
Honorable Member
Joined: 19 years ago

Mail sent. 🙂


Reply
Reddy_Kilowatt
Posts: 547
(@reddy-kilowatt)
Honorable Member
Joined: 19 years ago

I’m hoping a few more members will jump on the band wagon and give it a try…

At the moment, the Ebay Sintec PAUB003 is the only RS485 converter that I know of that works with the Renards at 115.2k.

If you find another, please let us know!

As for altering the firmware, Wayne J has an excellent video how-to here.

Watch the segment titled “Downloading the .asm file, change it to PWM or non-PWM”.

As per his example for PWM, go down a few lines from there and change the “#define BAUDRATE 57600” statement to read “#define BAUDRATE 115200”. That's it!

Raving Lunatic has posted some common testing guidelines earlier in this thread. Here.

-Craig


Reply
TimW
Posts: 554
 TimW
(@timw)
Honorable Member
Joined: 19 years ago

Hi RK
When you tested the converter that didn't work was it externally powered? I remember a discussion somewhere that an RS232-422 convertor might not be able to derive enough power from the serial port alone. Could that be making the performance marginal at 115.2K? Might that be a problem that the USB one that works doesn't suffer from (because a USB port can supply more power)?

I've got one of those serial port adaptors somewhere... will see if mine works.

Tim


Reply
Penfold
Posts: 1235
(@penfold)
Noble Member
Joined: 19 years ago

Here's a stupid question, but did you go into the settings in control panel on XP(I think it's in there) and change our your Serial baud rate from 56000 to 115200, before you tried to run it from a serial to RJ485 converter? I know that on my Ren 24 I had to change the setting on XP before it was happy.


Reply
Posts: 87
(@wingrunr)
Trusted Member
Joined: 19 years ago

I will pull my Renards and some lights out this weekend and give the faster speeds a try.


Reply
Penfold
Posts: 1235
(@penfold)
Noble Member
Joined: 19 years ago

I show throw in that I had to change my settings to 56000( it was set to a lower baud rate), because that is currently what I am running on. I haven't tried the 115200 either, but I would guess you would have to change that in the control panel as well.


Reply
TimW
Posts: 554
 TimW
(@timw)
Honorable Member
Joined: 19 years ago

I've managed to get my usb interface to talk to my 2X Ren 64's at 115.2k using another sintech rs232-485 interface like this one: http://cgi.ebay.com/Sintech-Serial-RS232-to-RS485-RS422-converter-adapter_W0QQitemZ310071090955QQihZ021QQcategoryZ41995QQtcZphotoQQcmdZViewItemQQ_trksidZp1742.m153.l1262

Haven't given it a real distance test yet, only through 15m of Cat5 cable for now.

I'm connecting via a USB/Serial interface. The only markings on it are HL340.

Tim


Reply
Reddy_Kilowatt
Posts: 547
(@reddy-kilowatt)
Honorable Member
Joined: 19 years ago
TimW wrote:Hi RK
When you tested the converter that didn't work was it externally powered? I remember a discussion somewhere that an RS232-422 convertor might not be able to derive enough power from the serial port alone. Could that be making the performance marginal at 115.2K? Might that be a problem that the USB one that works doesn't suffer from (because a USB port can supply more power)?

I've got one of those serial port adapters somewhere... will see if mine works.

Tim

Hi Tim,

I finally got back to testing today...

I again, tried the Hexin RS232=>RS485 converter off the PC's com port at 115.2k. This time, I wired it for external +5v off the PC's power supply.

Still no go.

TimW wrote:I've managed to get my usb interface to talk to my 2X Ren 64's at 115.2k using another sintech rs232-485 interface like this one: http://cgi.ebay.com/Sintech-Serial-RS232-to-RS485-RS422-converter-adapter_W0QQitemZ310071090955QQihZ021QQcategoryZ41995QQtcZphotoQQcmdZViewItemQQ_trksidZp1742.m153.l1262

Haven't given it a real distance test yet, only through 15m of Cat5 cable for now.

I'm connecting via a USB/Serial interface. The only markings on it are HL340.

Tim

Great news, Tim!

Was it externaly powered?

That converter looks pretty close to the one I used but none of the Hexin (model 485) converters that I have work beyond 57.6k.

I removed the shell on one, and it has HX520 ver1.0 printed on the PCB. It looks to have a 7660 charge pump circuit to provide the 485 +/- voltage levels and a Sipex (Exar) 485EMN to do the RS485 conversion.

Anybody have a Ren-T to try? :p

-Craig


Reply
Reddy_Kilowatt
Posts: 547
(@reddy-kilowatt)
Honorable Member
Joined: 19 years ago
Penfold wrote:Here's a stupid question, but did you go into the settings in control panel on XP(I think it's in there) and change our your Serial baud rate from 56000 to 115200, before you tried to run it from a serial to RJ485 converter? I know that on my Ren 24 I had to change the setting on XP before it was happy.
Penfold wrote:I show throw in that I had to change my settings to 56000( it was set to a lower baud rate), because that is currently what I am running on. I haven't tried the 115200 either, but I would guess you would have to change that in the control panel as well.

Yup, as TimW originally did, I first ran the Renards directly off the PC's RS232 com port and they all worked at 115.2k. 🙂

-Craig


Reply
Page 8 / 10
Share: