If you are using those sort of panels you won't need any Ledtriks hardware (the drivers are usually built into the panel itself). What you will need ...
Javo wrote:The issue happens late in longer sequences. Some other things to thing about...(if its not a pic or a serial interface issue of some sor...
Remember that its not just the waterproofing... If you're going to leave the strings out for any length of time you may need to consider UV as well......
I think another cause of flicker on the 5v pixels (I'm currently struggling with some TLS3001 on an E681) is voltage drop - in the wires to the contr...
John FWIW Having met you once or twice, I am reasonably confident (i.e. certain) you are not a scammer. You're one of the good guys. (And now you ob...
Lots of people used aluminium/wood/steel strips and just mounted the boards to them. Bit like
I don't know how to do this using organise frames. But you can merge frames using copy and paste when editing the frames (under the Ledtriks menu). T...
Matt_Edwards wrote: I have even suggested I go off grid for the week. Is that possible 🙂 ? All the best for the new gig Matt If a change is as g...
stempile wrote:I agree with you! I started yesterday with trying to figure out what the is by walking through both versions. Initially I was hoping t...
MPH have you come across EMI issues of those smaller supplies under load? I ran a few 12V switch modes last year with 3 channel controllers and was ab...
Woohoo! All the best to you both for a happy life together TP. Tim
Joe - sorry in advance if I'm stating the obvious below. I can't see exactly where the gap in your thinking is (you seem to be working it out just fin...
aussiephil wrote: I do feel though that not being able to participate in a group buy because I am not a Supporting Member would be an insult to everyt...
Thanks for sharing this Don Clever. Inspirational. And best of all, very DIY. Tim
JHinkle wrote: Question: Controllers that currently work with RGB strings - are the three channels (R, G, B) always sequential in the message that is...
