travisb6989
@travisb6989
Estimable Member
Joined: Dec 29, 2012
Topics: 38 / Replies: 106
Topic
Replies: 11
Views: 5140
Reply
RE: Creating Beat Track

It seems I will be giving x lights a go. Wish my luck. I'd have to agree, vanilla dominates! lol

10 years ago
Reply
RE: Creating Beat Track

I am down with dropping LOR. Whats your pick vixen or xlights?

10 years ago
Reply
RE: Creating Beat Track

Just curious. Did I post this in the wrong thread?

10 years ago
Topic
Replies: 12
Views: 6017
Reply
RE: Distance from controller to first pixel

go to the falcon site and look under the 'vendors/other' section[/Q Found it thanks

10 years ago
Reply
RE: Distance from controller to first pixel

jaysdisaster wrote:No it will work with 5v or 12v from the original uAmp post " The uAmp operates as a 'pass through' for whatever voltage is supplied...

10 years ago
Reply
RE: Distance from controller to first pixel

Found some info on the uamp device. Seems it only works for 5V pixels? My entire display is 12v.

10 years ago
Reply
RE: Distance from controller to first pixel

chadowamsley wrote:My first year with pixels, but ordered some uamps from Falcon to extend my range and distances between nodes. Group buy going on no...

10 years ago
Reply
RE: Distance from controller to first pixel

I also have a part 2 to this question. How about distance between pixels? See the attached photo to go along with my explanation. -The middle ridge l...

10 years ago
Reply
RE: Distance from controller to first pixel

whitebuck wrote:It depends on your pixels, wire, etc.. I can get from 20' to 30' in some cases and had to up gage wire in other cases. I would test ...

10 years ago
Reply
RE: Distance from controller to first pixel

didjareally wrote:You should be fine with 10-15' using 16/3 wire(cut up extension cords) Much more than that and I would look into using cat5 for dat...

10 years ago
Topic
Reply
RE: Mounting Pixel strips to house

Block finished with stucco. And a wood fascia outline. I already installed all pixels using 1/2" conduit and hangers. Allowed me to only have 2 scre...

11 years ago
Forum
Reply
RE: White pixels appear yellow... Sometimes

What if it's the same power supply?

11 years ago
Page 4 / 10