Hello all.
I am looking to build a pixel grid this year for some really cool affects, but really to create an american flag as I like play some patriotic sequences. Also could use it for more than one holiday.
Anyway's my question is how far away can my E682 controller be from the first pixel in a string? For simplicity of install and avoiding power injection issues basically each row of pixels on my grid will be connected to one of the 16 outputs on the controller. Across two controllers as I have 29 rows. Another reason why I am doing this and using two controllers is because I will be over the rated power capacity of a single E682. The grid will be about 5' tall. I was hoping to put the controller on the ground since the grid will hang between columns on the front porch. If I locate the controller on the ground the distance from controller to highest row of pixels would be 10'13'. If this is to much I can try to mount the controllers to the grid frame but would like to avoid this if possible.
Thanks for the help!
You should be fine with 10-15' using 16/3 wire(cut up extension cords) Much more than that and I would look into using cat5 for data, but you should be fine at 10-11'.
How many pixels are you running per row? And are you running nodes or strips?
It depends on your pixels, wire, etc.. I can get from 20' to 30' in some cases and had to up gage wire in other cases. I would test your setup to determine what works for you.
Sent from my iPhone using Tapatalk
didjareally wrote:You should be fine with 10-15' using 16/3 wire(cut up extension cords) Much more than that and I would look into using cat5 for data, but you should be fine at 10-11'.How many pixels are you running per row? And are you running nodes or strips?
49 pixels per row. and nodes from holiday coro
whitebuck wrote:It depends on your pixels, wire, etc.. I can get from 20' to 30' in some cases and had to up gage wire in other cases. I would test your setup to determine what works for you.Sent from my iPhone using Tapatalk
i had planned on testing. Was just looking for a good rule of thumb to gauge my results on
