If both controllers are tied together and either in the same enclosure or connected side by side you don't even need to think about grounding issues. ...
Very very nice. What was the final inside diameter? I was wondering why half plywood and half black coro? My thinking would be coro circles cut thro...
I've looked at this and though I'd rather mount it up high using stage trusses. It's harder to hide but I think safer from would be bad guys. Truss se...
P. Short wrote:Me, me, me! I've been working on some PIC-based NRF projects, although I've become distracted by another more interesting project. Th...
World Semi has been holding the programming specifications back so they can sell their programmer. I have one coming so David and I hope to reverse en...
Yes, although David Pitts and I are collaborating on them. He's been busy working on the new F16 and FPD but I'll see if we can get together in the ne...
If you could I think you'd likely have to use the HDMI output's audio stream. Maybe the I2S with a multi channel codex.
Your question got me thinking about how to do this. First none of the sequencers handle anything more than stereo so your not going to be able to do w...
With the right software any keystoning should not be a major problem to work around.
That what I found when I found Hudson. Shipping is the killer which is why McMaster cost so much. If your going to by get a group together and get sev...
Right on, always, always run more conduit than you think you'll need when poring concrete or putting down paving stones. You'll thank your self later....
For me there is only USB Flash drive that I recommend and that's the SanDisk Cruzer Fit. It's small size really helps fit into a small area with the P...
If your dumping Renard add the option for one more opto so you can control transmit/receive then you could add RDM. Now you can remote program the dev...
