I can't speak highly enough of the Renard controllers. It was my first dive into sequenced lights and I have five of them now! Running them off of a r...
dirknerkle wrote:The SS24 (and SS16 or SS8) are probably the most rock-solid controllers you could ever hope to have. The RGBW is a variant of the Ren...
1pet2_9 wrote:Hrm that's the beauty of ordering from China and not diyledexpress. When you order from China, there is never any expectation that th...
Just an update on this. DIYLEDEXPRESS took care of the issue for me and I'm happy to say I have a full set of working extensions now! Great service on...
I have a few controllers in lengths of PVC with caps on the ends. Zip tied vertically with all the wiring out the bottom cap. Just label them clearly ...
This is cool!!Sent from my iPhone using Tapatalk
superdave wrote:You could add a wifi to your desktop, so you could upload to that other network. Many people will also use a FPP (Raspberry Pi) to si...
robbiet wrote:Thanks. That makes sense also to just use the info coming from FPP already and look at the idle state and/or playlist. That avoids the...
robbiet wrote:I am new to home assistant so still learning a ton... On the HA side, how do I make it look for these commands coming from FPP? (FYI.....
mrGrumpy wrote:Actually you can inject 5V every 100 (effectively every 50). 200 pixel run with 3 power points. Inject 1, 100, 200 Powder runs both d...
mrGrumpy wrote:I have nothing over 110 just because of my layout. But if you get the good units and 18 gauge wire, using 24v input, you can push that...
All of mine are from DIYLEDEXPRESS and have been going strong!Sent from my iPhone using Tapatalk
pmiller wrote:I revert back and forth between firmware constantly and never had an issue using a prop plug. I also had issues using zig zag on the 682...
Aurbo99 wrote:I'm using firmware 5.xxx beta I removed the zigzag configuration on the e682, used Vixen to reverse map the 33-64 nodes on each string,...
