Hi...
So I would finally like to do what I have wanted to for a long time: make a whole bunch of cheap wireless controllers (probably ESP32's), have them drive up to 4 SSR's or Mosfets apiece, and spread them out everywhere. What has killed me every time is the weatherproofing. Lots of people have solved this problem before. What are the best options for weatherproofing the controllers? Are there good ornaments (such as blowmolds) where I can hide them? I think I saw some good white boxes on Aliexpress for $11.50 apiece--which is like 200% the price of the ESP32 and the SSR's combined, plus I wasn't sure if the size was right or if you can route wires in & out and it will stay weatherproof.
Right now I'm looking at recycling the red plastic containers from lunch meats that I got at the grocery store--which is hilariously cheap, if I got it to work. It would work beautifully, if it were not for the wiring. I can't come up with a reliable seal around the wires yet, that will easily stay in place even if I am constantly opening up the box to check the wiring. Recycled paint buckets would work as well, but they're an eyesore.
p.s. I do see there is already a thread for where to buy enclosures, but I am not limiting myself to necessarily buying dedicated enclosures. For example maybe you can just hide in a blowmold, or 3-D print something.
thanks!
My ESPixelsticks are in pill bottles, holes for wires in the caps, and I mount them upside down. I have one in a pill bottle, in a RBL. Plastic containers from drink mixes work too, the ones that have packets you mix with water,
Cable Glands are an efficient way to get wiring in and out of a waterproof container. Personally, I have started using MTM30 Ammo boxes for a lot of my Power Supplies and Controllers.
Don't cheap out on the enclosures to protect your equipment. You do not want to have water intrusion into your controllers and lose part of your show. Your location will determine how careful you have to be.
Also I mount most of my enclosures on 1/2 PVC conduit which I slip over a piece of rebar pounded into the ground. With this mounting system, I can even have open holes in the bottom of the enclosure, the water will just runoff. Remember, Gravity is not just a Good Idea, It's the Law!
Remember, Gravity is not just a Good Idea, It's the Law!
ROFLMAO...
I have a few controllers in lengths of PVC with caps on the ends. Zip tied vertically with all the wiring out the bottom cap. Just label them clearly since the look like pipe bombs!
Sent from my iPhone using Tapatalk

