Last seen: Nov 17, 2026
MichiganLights wrote: I'm looking for ideas and inspiration, nothing specific, just curious what people are doing. Actually printing cases for my ES...
MichiganLights wrote: Ender 3 V2 here. I have similar issues time to time making lost of spaghetti. For me the countermeasure is to adjust the extru...
Merry Christmas everyone!
mrGrumpy wrote: As I recall; U3 is a 12 to 5V regulator, therefore adjusting board's control voltage. Your pixel voltage actually is not controlled.....
MartinMueller2003 wrote: While I cannot answer your question, I CAN give you an alternate solution. First, ALL WS281x pixels use a 5v data line. That ...
So i did more digging. Supply voltages not listed in assembly or usage guide, but i found a page on forkineye about this board and it has a buck conve...
Permanent as in not taking them down every year! I have had my share of repairs over the years, nothing lasts forever. I wonder how people who paid t...
Merry Christmas and Happy New Year! On to the next!
Mine is 30 x 30 (900 bullet pixels) @ 1" spacing. Its about 15' from the road. Experimenting with Govee Net lights now, got them on sale, seed pixels,...
I tried in Vixen, unpatched the channels I wanted to go to, then patched the original channel, etc.. patched the unused channels so they weren't empty...
MikeKrebs wrote: I don't have any but zaker indicated both first and last wired funky. So, do you have to change something coming out of last pixel? ...
I have about 1200 of them. Plugged them in and used them. Yes they are wired funky at the beginning and end, but corrected in the connectors. Haven't...
