No problem. Firstly: The EtherConGateway by J1Systems found With the vixen plugin this will connect to your PC via Ethernet and output 4 - 8 dmx un...
I dont believe Ed is off topic here. Flash asked about DMX and RGB nodes. To do DMX from vixen you do not have to have a DMX dongle. Yes you can us...
Actually according to the data sheet, SmartAlec is right. Not specifically about SPI,but in regards to these chips. Spec say 6 metres at 2Mhz clock...
Completley agree with David. You can buy ground loop isolators from ebay for this problem for around the $10 mark.
Updated board Size and Layout
Please see post below for an update to this project.
We are looking at a slight change to the board. We had already implemented the option of a low current trigger. We are exploring further possiblitie...
Post number 1 Under the video, the tag for the board says "Led Strobe 3.jpg". Although I dont think that is the very latest design, but very close.
Aususer I hope you have a very steady hand and a good microscope, those chips are tiny, 2mm square. 😯
Well all I can say, Is that I an very envious of everyone who will be attending. I would love to join you all, but my third child is due that weekend...
If I am not to late can you put me down for 1000. Cheers
Withou being able to open up the pcb files, can you tell me the size of the board now?
Before answering your question are you sure the plug pack is not producing 24V AC. Most light strings in Australia run a 24 V AC. How are you measuri...
It is not DC. It just a fullwave rectified AC signal, which triacs can still work from.I used this for my entire display this year.
To keep the parts count down and cost and time assembling. You can place a bridge rectifier directly to the transformer and supply the triacs with a ...
