I have got some WS2811 strips working. Information on protocol is over at ACL.
I am using Windows 7 Home Premium Quad i5 2400s 6 GB Ram 1920 x 1080
From a recommendation in the chat at ACL I had to lower my screen resolution to 800x600 to get it to work. Unfortunately at that resolution it is almo...
That looks fantastic Don. I especially like the animation plugin, its where it all seems to be lacking at the moment. That write up is very comprehen...
You could use the 16f688 which i believe the renard uses, but you would have to bit bang the SPI receive part of the program. You maybe better lookin...
I own the OLS board, but also own a Zeroplus LA. I tend to always grab the ZeroPLus unit when i need one.
I have been watching this thread with interest. Well done Jim with what looks like a nice controller. For those who don't know me, I am responsible ...
Hey Mike I like the idea. I dont know how well the pixel data will travel over slip rings. The pulse width to control the TM1804 chip, (which we be...
And to do it in one step use: avrdude -c usbtiny -p attiny2313 -U flash:w:dmx8dcssr.hex -U efuse:w:0xFF:m -U hfuse:w:0xD9:m -U lfuse:w:0xFF:m
Thanks goes to Matt for telling me the Fuse bits for anyone elase that is having issues or is using avr dude, once you have programmed the board usin...
Thanks Matt and Robert, I figured it would have to do with the programming. the red led does flash very slowly and is not really at a steady rate. ...
Quick update. I have put the logic analyser on it. Good dmx data is coming out of the 485 chip and is present on pin2 of the 2313. So seems there ...
Aussiephil has performed a lot of voltage current measurements on the 2010 Leds from BigW. His results have been posted over at forums.auschristmasli...
When testing the beta boards we had made, I soldered them up using paste and the standard rolled solder. I found it easier to solder them using the p...
