keithsw1111 wrote:Can you post your controller comfiguration Hi Keith, Thanks for your input, checking the config page of the ESPixelstick I found ...
sporadic wrote:Is your xLights computer hardwired as well? If wireless and on the same AP, it can cause buffering issues. Thanks Shelby, the compute...
RichD wrote:I've just set up the same settings here to be sure and it works ok. When outputting from xlights open the espixelstick web page and go to ...
sporadic wrote:By default, the ESPixelStick has a universe boundary of 512 and your xLights configuration is using 510. If you're not on 3.0-rc3, you...
A timely reminder to all of us to Take Extra Care when we are setting up our displays, Get well "Young Man" and look forward to your show next year....
My comment would be:- In my case, after drilling, I had to ream the rear holes in the pipe considerably so that the pixel could be inserted easily an...
I had exactly the same problem - see thread :- In my case the "cure", finally, was to draw a line along the pipe for re-assurance when drilling, and...
Rjlangley wrote:Sweet! If you have a video, please post. I got to meet a neighbor last year, who left me a card the year before. It's a great way to m...
Barnabybear wrote:Hi, a top tip - if your using DuPont type jumper cables and you push them directly into an IC socket, they bend the socket and it wi...
Many thanks gentlemen for your helpfull comments, I will not say I have cured my problems but I think I have now got it under control to a point that ...
Many thanks Gentlemen, seem like "suck it and see" will be the order of the day, a bit of trial and hopefully not too much "error" involved. Terry
