steve123
@steve123
Estimable Member
Joined: Nov 18, 2019
Topics: 5 / Replies: 181
Reply
RE: Pixel String Current Data???

superdave wrote:One of the differences I could see were between regulated and non-regulated versions. There is also the 5v vs 12v to consider as well...

6 years ago
Reply
RE: Weirdest color issue ever

Any chance you mixed pixel strings when you put the prop together this year? Some pixel controllers change the RGB order. I have some strips with GR...

6 years ago
Forum
Reply
RE: Signstek Fm transmitter...using antenna that came with it...not too good so far

I have one of the inexpensive transmitters from China. I assembled the dipole antenna. I have the antenna located inside of my front attached garage...

6 years ago
Forum
Reply
RE: Another first year

Are you using outdoor speakers for the sound?

6 years ago
Forum
Reply
RE: Another first year

Wow, that is pretty amazing. Congrats.

6 years ago
Forum
Reply
RE: Signstek Fm transmitter...using antenna that came with it...not too good so far

Hmmm ... that is an interesting link. It appears to say that the impedance is dependant on the placement of the antenna above ground. What is not cl...

6 years ago
Forum
Reply
RE: Signstek Fm transmitter...using antenna that came with it...not too good so far

MikeKrebs, do you know what the impedance of the wiki dipole is? Is it 50 ohms? Should I use 50 ohm or 75 ohm coax?

6 years ago
Forum
Reply
RE: Pixel current draw confusion

Cmndr Brain wrote:Both are 18awg bullet nodes 10cm spacing. Are the pixels using the same controllers in each string? Your wire is most definitel...

6 years ago
Reply
RE: DIY meteor tubes/icicles without ray wu Tee's or other parts

Bwinter, I am thinking about building these. Could you please send me the gerbers? Would you be willing to share the design?

6 years ago
Reply
RE: DIY meteor tubes/icicles without ray wu Tee's or other parts

bobsmith wrote:I wonder if that bond wire that goes oh so close over the capacitor nearly shorting it out explains the few random pixel failures I've ...

6 years ago
Reply
RE: DIY meteor tubes/icicles without ray wu Tee's or other parts

Yeah, I think you can likely get those buffers from DigiKey. In this case, simply use a wire to fix the two blown traces and try it out. If it doesn...

6 years ago
Reply
RE: best way to mount leds onto pvc pipe?

curtinti wrote:Hi all, Related to this thread, I created these window frames in PVC for a pair of double windows and am using Boscoyo strip and of co...

6 years ago
Forum
PVC
Reply
RE: DIY meteor tubes/icicles without ray wu Tee's or other parts

You may have to replace the buffer chips ... depending on which power supply won the battle. Hard to tell if the voltage at the buffers rose above th...

6 years ago
Reply
RE: Help me ID replacement part needed for this projector board

Perhaps the wires got reversed when he soldered them back together. Easy to do because it can be difficult to tell which is which if they are not col...

6 years ago
Reply
RE: Help me ID replacement part needed for this projector board

Unfortunately, the photo is blurred and the cylinder needs to be rotated to reveal the capacitance and voltage. It appears the board in question has ...

6 years ago
Page 8 / 13