Activity
 
Notifications
Clear all
Shubb
@shubb
Trusted Member
Joined: Jan 12, 2013
Topics: 1 / Replies: 52
Reply
RE: Does anyone build props anymore?

I have to agree with you Tim. Most people go with display items that others are using. Right now, RGTB and pixels are a hot topic so many people are...

14 years ago
Forum
Reply
RE: E6804 4-port pixel controller

Great news Jim. Thanks for the update. Scott

14 years ago
Reply
RE: New Pixel Controller

I'm sure Jim wouldn't mind having a heads up on how many people were planning on buying the new controllers. It might help him anticipate how much in...

14 years ago
Reply
RE: first setup

Keep in mind there are some tricks to keeping the "Control Lights" active on LOR without a LOR dongle. I can't remember what the steps are, but you s...

14 years ago
Forum
Reply
RE: recommended LOR starter items for mini trees?

Either Showtime or PC controllers form LOR will run DMX.

14 years ago
Forum
Reply
RE: recommended LOR starter items for mini trees?

The 1600 series controllers are complete units in a metal enclosure with a UL rating for commercial installations. You can get a 16 channel LOR kit fo...

14 years ago
Forum
Reply
RE: Most wanted tools !!

I would probably sneeze or get the hiccups halfway through and ruin the whole part.

14 years ago
Forum
Reply
RE: Roofline and pixels

I used 45mm "pucks" with 3 RGB's Led's in each to outline my roof. I used both 2811 and 2801 (2811 on house, 2801 on garage) Next year I am ditching ...

14 years ago
Reply
RE: FS: San Devices e682 and 300 2811 Pixels

Good price on the E682, but I need 12v pixels.

14 years ago
Reply
RE: E682 Configuratioon Information: Assigning DMX addresses to your pixels

It seems to me that most people find it difficult to understand until they actually start to configure the board and connect strings. Before I got my ...

14 years ago
Reply
RE: FS: San Devices e682 and 300 2811 Pixels

Do you have a link to the pixels strings and what voltage? I assume everything is in working order?

14 years ago
Reply
RE: Ray Wu's Pixel strips 5M at Full Power flicker on E682

I had flickering/color issues using E68x and 2811 ribbons. The wire was 4 core the customer had purchased and had enough shielding to cause interferan...

14 years ago
Forum
Reply
RE: New Pixel Controller

I'm getting exited! Starting to sound like a well laid out board. Keep us posted on the status so you can take my money. Scott

14 years ago
Reply
RE: Nutcracker 3.0 Released

Did I miss what the difference is between 3.0.0 and 3.0.1?

14 years ago
Forum
Reply
RE: Nutcracker 3.0 Released

I'm amazed at some of the posts about this. It's a free tool that you can use, or not. It's that simple. I think the new release if great!! I had t...

14 years ago
Forum
Page 3 / 4
Share: