Hi all
I'm thinking through downscaling my vision of pixel tree or matrix and was wondering about the best pixel to use on a roofline. I've seen some rooflines done with what looks like a continual line....(obviously closely spaced) of pixels.... I like the look of chase possibilities with what appears as a non interupted strings... How closely would you have to space in order to achieve that result and/or is that done with a strip vs regular pixels?
I am also interested some insight as to how easy it is to weatherproof such a setup.... If I recall correctly I think I remember some sort of clear cover that you can place strips into..... Otherwise I've got to figure out how to mount regular pixels....they will not be under any overhangs for protection so I'm scratching my head a bit here.....
Anyone with some examples to offer up would be 'muchly' appreciated....
Regards....SC
I used 45mm "pucks" with 3 RGB's Led's in each to outline my roof. I used both 2811 and 2801 (2811 on house, 2801 on garage)
Next year I am ditching the 2801's for all 2811's.
The spacing was 4"apart and had some really great effects.
