Question about grou...
 
Notifications
Clear all

Question about grouping

20 Posts
7 Users
0 Reactions
6,258 Views
Posts: 6728
Topic starter
(@p-short)
Illustrious Member
Joined: 20 years ago
[#25001]

Just a quick question: what is 'grouping' in the context of E68x? Someone asked about it yesterday in a discussion about the Renard-pixel controller that I'm working on, and at the time I gave a somewhat bs reply because I was thinking that he was talking about something else. So, what is grouping? My take is that it's a feature where you cause the data from a number n of input pixels to be replicated m times in the output stream, so that 3xn input octets controls mxn real-world hardware pixels. Is this more or less correct, and is this a static configuration of the bridge/controller that does not vary in real time from sequence to sequence or within a given sequence?


19 Replies
Posts: 4092
(@skunberg)
Famed Member
Joined: 18 years ago

Grouping on a 68x is grouping 3 (or however many you setup) pixels together. So pixel one two and three show the same. But your software (Vixen) only sends data for 1 pixel. So 75 pixels grouped 3 requires 25 RGB channels. So yes your correct.


Reply
Posts: 6728
Topic starter
(@p-short)
Illustrious Member
Joined: 20 years ago

What are the restrictions on grouping, in terms of the number of pixels in each group and the number of groups per Universe (or whatever intermediate association there may be)?


Reply
Posts: 4092
(@skunberg)
Famed Member
Joined: 18 years ago

No real limit has been given that I know of, but grouping can be the length of the string (so turning it to a dumb string) or any amount less. It also increases the amount of pixels the controller can handle (your 680 is controlled pixels so grouping 3 is a third less your controlling).


Reply
Posts: 6728
Topic starter
(@p-short)
Illustrious Member
Joined: 20 years ago
Skunberg wrote:No real limit has been given that I know of, but grouping can be the length of the string (so turning it to a dumb string) or any amount less. It also increases the amount of pixels the controller can handle (your 680 is controlled pixels so grouping 3 is a third less your controlling).

Just so that I'm clear, what does 'grouping 3' mean?


Reply
Page 1 / 4
Share: