New Pixel Controlle...
 
Notifications
Clear all

New Pixel Controller

159 Posts
60 Users
0 Reactions
58.8 K Views
Posts: 34
(@tazguy)
Eminent Member
Joined: 14 years ago
angus40 wrote:something looks odd with that picture though .

the pixels that are tied to the black backing and the loose pixels don't configure properly was there some kind of union there incorrect wiring ?

Power injection gone wrong ?

+1 looks like there was a T-splice or union there somewhere...


Reply
Aurbo99
Posts: 2804
(@aurbo99)
Famed Member
Joined: 19 years ago

Jim

Its now "next month".. shipping yet? :wow:


Reply
Posts: 1249
Topic starter
(@jstjohnz)
Noble Member
Joined: 17 years ago

Well, not exactly. It's taken me longer than expected to get the PCB layout nailed down. Rev 2 used a DC-DC converter in place of the linear regulator, but the DC-DC converter needed more than 5V to work. I played with a few different dc-dc converters but wasn't really happy with any of them, so I'm back to a linear regulator but with a more efficient heat sink. The last layout used a heat sink that turned out to be overkill, so hopefully the boards coming in this Friday will be good. The goal is a jumperless power supply that will work automatically from +5V or +12V pixel power.

I did reverse the orientation of the ethernet module, and the pixel power input is now along the short edge, so that all cabling can come off of one side of the board.


Reply
Posts: 53
(@shubb)
Trusted Member
Joined: 14 years ago

I'm getting exited! Starting to sound like a well laid out board.
Keep us posted on the status so you can take my money.

Scott


Reply
Posts: 213
(@aaron1)
Estimable Member
Joined: 16 years ago
Shubb wrote:Keep us posted on the status so you can take my money.

I have some that's ready to depart from my wallet as well. 🙂


Reply
Page 18 / 32
Share: