I can picture it now, forgot about that zip tie slot. I appreciate the feedback. You guys are probably right, and I'll likely just stick to SS24s. ...
Didn't realize the sizes were so close. Nonetheless mounting the 2000 to a stake is annoying. I can downsize or sell, makes no difference to me.
Overall footprint is my main issue. Both can be daisy chained; Not sure what other expansions there are, but I doubt I'd use them. I've gotten my s...
Hope you're saving some put put on the RV! Best wishes on the journey!
In xlights I've ONLY ever used the AC Lights Toolbar. I'm not sure any of the other effects work on AC lights correctly. It's a little weird at 1st ...
I really hope you pulled out a mega-spotlight and aimed it at his house. Payback from 2013.
One of those videos has a specific example of how to do the chase effect super easy. If that youtube link doesn't have it, go to the xlights.org pa...
Can you take off the winch, hardware, etc, and flip the pole? I haven't looked at mine, but I think it could work.
XmasinVancouver wrote:Can I assume you would be having the pixel hold side of the j channel face down in that situation? So that the short and long s...
You only have 1 E682 correct? Seems obvious, but just making sure. If you had 2 you just swap them and retest...halfsplit the problem.
Cant figure out how to add more than one pic. All scrap wood and a dowel. Inside does j-channel, outside does c-channel.
Just a couple thoughts: Will the 300W circuit now consume 600W at the power supply's end due to the 50% voltage drop? I think you understand, but...
Use a multimeter. Set it to the 'continuity' setting or just measure the resistance. Resistance should be practically nothing. If you get "OL" or n...
Uh, just check the fuses?
