LED Keeper and Fail...
 
Notifications
Clear all

LED Keeper and Failed Strings...

8 Posts
4 Users
0 Reactions
8,222 Views
Posts: 934
Topic starter
(@superfreak3)
Noble Member
Joined: 19 years ago
[#51280]

Hi all,

For the first time in about 8 years I've had some LED strings fail. So, I thought it was time to get an LED Keeper to see if the strings can be fixed.

After watching a youtube video covering how to narrow things down, I tried with my strings. The only problem, if it can be called that is when I pierce the wire/pull the trigger, the entire string lights. It doesn't look like there are many bad bulbs. Does that indicate a problem with the fuses?


7 Replies
Posts: 102
(@rmcgee5)
Estimable Member
Joined: 14 years ago

Uh, just check the fuses?


Reply
Posts: 934
Topic starter
(@superfreak3)
Noble Member
Joined: 19 years ago

Yeah, I get that, but I don't think I have any extras. That's why I was checking.


Reply
Posts: 102
(@rmcgee5)
Estimable Member
Joined: 14 years ago

Use a multimeter. Set it to the 'continuity' setting or just measure the resistance. Resistance should be practically nothing. If you get "OL" or no reading at all then it's blown. If the multimeter leads fit you don't even need to remove the fuse. Just put a lead on each metal cap.

If no multimeter is present...I think they're usually glass. Just remove them and hold them up to a light. If you see any abnormalities it's probably bad.

As long as your talking about the little tiny glass fuses in the plug, then I have a kajillion of these things. If you really need some I can probably mail them to you.

p.s. I've never blown a fuse. Maybe there's some corrosion, or your plug is just no longer making good contact.


Reply
Posts: 335
(@cdanna77)
Reputable Member
Joined: 12 years ago

Check all the wires going into each bulb. I had a set where nothing looked wrong or broken at first, then once I looked close at all the connections one of the sockets had a corroded wire that let go up inside the the socket.


Reply
Page 1 / 2
Share: