duramadmax wrote:remember to power on the px1 first then your bridge (I assume you are using one) I'm actually sending data from a usb to serial por...
So I tried to wire the strings using this diagram for a 4 pin straight through connection, and I wired my plugs as if this diagram was the back view ...
Hey all, just wanted to update you guys and thank you for your help. My initial issue, as I said, was that when I was choosing the hex file to progra...
Thanks for the help. So I think I've got the pic prgramming down. I was opening the hex file in mplab as opposed to importing it. Now I get the Rx led...
Come to think of it, I follow instructions the first time I programmed it which was when it worked, but for the other times I just assumed I was doing...
libby2cm wrote:Haven't used them, but do they come with connectors? They are all built with ws2811 drivers I believe so you only need 3 pin for both....
Updated first post with whats left. thanks again to everyone who's helped me out
First post updated. All items above are still available
I've got 40 boxes of 100 ct white new in the box except for 2 of them. Also 8 used blue 100 ct strings
Thanks guys. I've uploaded some pictures of the SS8 board. The 5 volt regulator is soldered to wires that are soldered to the board because the regula...
I like your idea of having the preview go onto a second monitor, but for those who don't have a 2 monitor setup I think a toolbar button to toggle adj...
