Now I got control of the machine :-). Thanks to all and especially to Martin for your advices. So I started with cleaning up in the universes so I all...
Ok sending some more screenshots:
When you write input on controller, do you mean input on falcon controller because as you can see on the screenshot below I did not settings here:
Hi Martin thanks for your reply really appriciate your guys taking your time. So if I understand your statement "test pure rgb one at a time" on the c...
I am using the white effect in Falcon controller test mode to make the machine work. I tried with the custom value 255 in vixen but without luck. Prop...
Hi yes my Beamz S1500 works fine now and I can acutally ajust the value of smoke from my Vixen sequence, so thanks for the help on that. I will try t...
I tried with a value of 100 on both channels, no activation on machine. I do not know if my DMX line is properly terminated, but it seems as it becaus...
Tried to do like this: Did not work, any ideas what I could try?
So next issue is that I also have a DMX snow machine (Beamz SNOW1800). Trying to do a similar setup but it does not work. So running a test on Falcon ...
Great that worked.
So related to my example above in this thread is there a way I can change the results of the words that is wrong?
So I have two danish words I use. Jeg (means I) and det (means it), very simple words. They are translated like this: (picture attached). This is way...
