I have a FPP player where I have a MQQT setup. It is possible for me from the FPP player to create a playlist where I can trigger a MQQT message.
I was wondering if it is possible for me within a sequence inside Vixen to trigger a defined MQQT message on the FPP.
There are several ways to do this. In FPP, you can setup a control channel where particular values on that channel send a command preset which could be an MQTT send.
Another way is to actually use the MQTT Output on the Channel Output "Other" tab. Give it a 1-4 channel range (configure on the Other tab) and then FPP will send the channel data via MQTT for each frame (possibly only if it's different than the previous frame, I've never looked at it).
You can trigger commands from within a sequence running in FPP. You need a trigger channel in your sequence which would just be an element in Vixen mapped to a controller. That channel is configured in FPP to listen for values that are mapped to commands. In Vixen you would just use a custom value effect to send the needed value at the proper time. I don't see a specific command in FPP to send an MQTT message, so you may need to trigger a script that can send the MQTT message. There maybe someone else more versed in getting FPP to send the MQTT message from a command.
The MQTT commands only appear in FPP if MQTT is configured and it's able to connect. If you aren't using mqtt, they won't be visible.
