keyman6868
@keyman6868
Eminent Member
Joined: Dec 24, 2014
Topics: 3 / Replies: 37
Reply
RE: generic serial setup failure

Okay went to the garage and fired up my arduino and cpu, Now it finds the board and automatically sends data when vixen opens. Im not sure what the re...

12 years ago
Reply
RE: generic serial setup failure

Thank you lightUp! I have posted the sketch and hopefully you can lead me in the right direction!

12 years ago
Reply
RE: generic serial setup failure

// This code was written by Victor Perez for doityourselfchristmas.com based on the code from Zparticle, Si_champion and Neil Tapp. // To adapt the c...

12 years ago
Reply
RE: Color Organ for Vixen 2.x

When I get home from work I will do it. I'm trying Vixen 2.1.1.0 I already have Vixen 3 set up and running and a sequence but wanted to try the color ...

12 years ago
Reply
RE: generic serial setup failure

okay the only way I can get it to work is by downloading the driver for my breakout board and changing the baud rate to 57600 (breakout board baud rat...

12 years ago
Reply
RE: Color Organ for Vixen 2.x

"ADD IN ERROR - METHOD NOT FOUND: UINT64 VIXEN. CHANNEL GET-ID0;" this is the error I get when trying to do the color organ Im using latest version of...

12 years ago
Reply
RE: generic serial setup failure

does Java play a part in the communication from vixen lights to the arduino? What version should I be running? Java SE Development Kit 8 Downloads?

12 years ago
Reply
RE: generic serial setup failure

the header (~!) very important. if it is not there it wont send info from vixen to the mega! Am i on the right track? it seems after i have done that ...

12 years ago
Reply
RE: generic serial setup failure

yep i have tried 3 cpu. Im wondering if it might be chipset problem on my arduino? Im at a loss but I WILL FIGURE IT OUT! one way or another! Im going...

12 years ago
Reply
12 years ago
Reply
RE: vixen3 freezing during serial port setup

My bad I tired this am and back to square 1.

12 years ago
Reply
RE: vixen3 freezing during serial port setup

this is what i had to do to solve the problem-- opening a port in Windows Firewall Windows 7 or 8 or even 10(beta) which is what I have If Windows Fi...

12 years ago
Reply
RE: generic serial setup failure

this is what i had to do to solve the problem-- opening a port in Windows Firewall Windows 7 or 8 or even 10(beta) which is what I have If Windows Fi...

12 years ago
Reply
RE: generic serial setup failure

I think there may be some issue with my windows, it only shows one com port. I think i need to set up more com ports and im trying to figure out how! ...

12 years ago
Reply
RE: generic serial setup failure

I pulled the error log after I started from scratch and this is what i get--- 12/31/2014 06:41:48 [VixenModules.Output.GenericSerial.Module] COM3 is i...

12 years ago
Page 2 / 3