I think there may be some issue with my windows, it only shows one com port. I think i need to set up more com ports and im trying to figure out how! Does vixen 3 connect to a different com port? Is it suppose to be a virtual com port that then connect to vixen3 to share information?
keyman6868 wrote:I think there may be some issue with my windows, it only shows one com port. I think i need to set up more com ports and im trying to figure out how! Does vixen 3 connect to a different com port? Is it suppose to be a virtual com port that then connect to vixen3 to share information?
My Win7 doesn't show any COM port until I plug in my Arduino board. That must be normal.
Now that my PC sees Arduino and sets it for COM 11. If I then plugin my USB-TTL adapter (breakout board) I can see in Device Manager that COM 5 is assigned to this adapter.
Now when I open Vixen and select the Generic Serial controller, I can see two COM ports, 11 and 5. So you get to choose which COM you want to talk to. That is normal.
This is why I suggest that you first open the Arduino (i.e. plug it in the USB port) so Windows can set its COM port and then you open Vixen, find the COM port Arduino is using,
A similar procedure I would use if I was going to use the USB-TTL adapter by first plugging in the adapter and then open Vixen and select the COM port that the adapter is using.
Hope this helps you....
this is what i had to do to solve the problem--
opening a port in Windows Firewall
Windows 7 or 8 or even 10(beta) which is what I have
If Windows Firewall is blocking a program and you want to allow that program to communicate through the firewall, you can usually do that by selecting the program in the list of allowed programs (also called the exceptions list) in Windows Firewall
However, if the program isn't listed, you might need to open a port. For example, to play a multiplayer game with friends online, you might need to open a port for the game so that the firewall allows the game information to reach your computer. A port stays open all the time, so be sure to close ports that you don't need open anymore.
Open Windows Firewall by clicking the Start button, and then clicking Control Panel. In the search box, type firewall, and then click Windows Firewall.
In the left pane, click Advanced settings. Administrator permission required If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
In the Windows Firewall with Advanced Security dialog box, in the left pane, click Inbound Rules, and then, in the right pane, click New Rule.
Follow the instructions in the New Inbound Rule wizard.
It quit working
keyman6868 wrote:It quit working
do you have another computer to try?
