generic serial setu...
 
Notifications
Clear all

generic serial setup failure

36 Posts
3 Users
0 Reactions
15.1 K Views
Posts: 40
Topic starter
(@keyman6868)
Eminent Member
Joined: 12 years ago

Okay went to the garage and fired up my arduino and cpu, Now it finds the board and automatically sends data when vixen opens. Im not sure what the reason is but it seems to work with out the breakout board hooked up now. I really do appreciate you trying to help me! the original sketch was for 16 channels and I plan on running 48 relays. for my first show. I changed the sketch from 16 to 48 and I changed the timing for the random mode and then inverted lights because it was backwards (lights on when should be off). You said don't open serial monitor in the ide- what in the arduino? Thanks again for your help!


Reply
Posts: 2541
(@lightup)
Famed Member
Joined: 17 years ago
keyman6868 wrote:... You said don't open serial monitor in the ide- what in the arduino? Thanks again for your help!

Yes, in the Arduino IDE under Tools->Serial Monitor. Your sketch doesn't use any Serial.print() statements so it isn't used, but it if opened it can interfere with the Vixen port and possibly hang.


Reply
Posts: 40
Topic starter
(@keyman6868)
Eminent Member
Joined: 12 years ago

YOU ROCK! I bet that is the problem! Question? can i add them into my program and eliminate that problem?


Reply
Posts: 2541
(@lightup)
Famed Member
Joined: 17 years ago
keyman6868 wrote:YOU ROCK! I bet that is the problem! Question? can i add them into my program and eliminate that problem?

I don't follow your question. Add what?


Reply
Posts: 40
Topic starter
(@keyman6868)
Eminent Member
Joined: 12 years ago

" Your sketch doesn't use any Serial.print() statements so it isn't used"


Reply
Page 6 / 8
Share: