I put a surge protector on it and it seems to have fixed the problem. Thanks for the advice.
I have the same problem with the comm out on my 24LV. I finally decided to move the 24LV to the end of my comm chain. I still need to find a solution...
I'll reflash my PICS and see if that helps. Thanks
1 - Bag Male EOL 1 - Bag Female EOL 1 - Bag Female Inline
Re: Can’t Build a Program (Output Plugin Errors) They all only have one active plugin "Renard Dimmer (modified)"
Thanks for the prompt support! I am refering to the Mighty Minis
1 SS24 BOM kit 1 SS24 PCB 1 Spare kit YES insurance
I removed the transformer and the two 120V jumpers that were next to it. I was able to find a 50 ohm 10 watt resistor at radio shack. Will that work...
I bought the 24LV for the sole purpose of running the mighty mini floods. At this point I assume I need to remove the transformer and follow the ins...
I remarked out the "output negative" line in the ASM file before compiling the Hex file and flashing the PIC. I put two ;; in front of that line and ...
