The 120V jumpers are soldered in and in the proper position. I also reheated the solder points on the transformer. Same symptoms.......
Removing the optos did turn the lights off. I cleaned the back of the board with some "brake cleaner". This worked really well removing flux! I als...
Ch 4 on U6 and Ch 10 on U7
Make sure you look closely at the diodes, as noted in the instructions. All of my red LEDs were miss marked. The long leg was on the cathode and the...
I got my order today. Thanks for making it happen!
BINGO! I had reversed the polarity out of the H11AA1. At least I gained more experience programming PICs. Thanks for the help.
I received my transmitter. Thanks for making it happen!
I have a CAT-5 tester already. I just need to know when to use it....... Thanks for the advice all.
I finally got it to work!! There were several problems that caused my issues. - The PIC wasn't programmed (purchased a PICkit 3 and flashed the PIC)...
-I got a PICkit 2 programer and flashed the PIC. All of the LEDs lit -I hooked up the RenC and the Grinch -I get the pwr, the heart beat and the firm...
As an experiment, I took out the programmed PIC and got the same results. Only the power LED is lit. I put in another PIC that is not programmed and ...
What PIC programer do you have or suggest?
