welcome from the UK im not very active on here anymore but that is due to work and now we have a uk based facebook group. have a look at www.builda...
Hi Tom Im also from the UK you need to have data for the lights to come on, I would look at the Arduino uno platform for testing, you can pick them...
I can say that the esp modules work in the old style housing with the esp mounted in the back where he power supply used to be. I have 5 of the pixifl...
I have the 5 minute timer already for my display Quite easy to set up I found a adjustable timer relay with a 12v dc coil, it has a small display so ...
Looking at that board from spark fun you should be able to adapt some code that's floating around on here to take a serial input via USB and control t...
Make sure you channels per universe and set to 510 and not 512. The latte causes a problem like you are saying and check your patching in xlights and ...
Glad you got it sorted 🙂 I have two running wireless renard boards my tr24 is still hard wired this year
I know of a couple of people who where on last year Matt Johnson of the Johnson family light show And I can not remember the other guy I know Matt ...
Plug in a monitor and go split screen that's what I do. I have a full size laptop and some buttons are off the bottom of the screen. Only since 3.3 th...
Please see attached a quick drawing I have done to show the ssr to relay to fog machine. I use this method for a snow machine but the principle is the...
I use a Dc ssr for my snow machine really simple to do. Take apart the switch and use the two weed on the switch. Put them into a dc coil relay and ...
You should have ground coming from the controller too aswell as data in sure I have read your correct and your only taking data from the controller W...
When you export from vixen you get the screen with start channels for controllers You need to make sure they are the same in fpp
You should be fine with the wires distance between the strips and also the power should be fine. I ran 5m of the strip ws2811 30led/m and only added p...
yes i have had more than one universe on a board like this, it was on a bread board testing but it worked I drove 250 pixels 🙂
