Activity
 
Notifications
Clear all
jerry72
@jerry72
Guest
Reputable Member
Joined: Dec 29, 2013
Topics: 15 / Replies: 342
Reply
RE: String son E682 cloning

scott4864 wrote:Do you have the channels per universe set the same in the controller and whatever software you are using to control the lights? You ca...

9 years ago
Topic
Replies: 7
Views: 2632
Reply
RE: For Sale: Vastelec FM-02

Man, if I had the dough I could just pick it up from ya when I am in Clackamas tomorrow.

9 years ago
Reply
RE: Renard 48LSD Dumb RGB Pixel Problems

Problem is the Ren 48 LSD was never meant for dumb nodes., it was designed to run DC SSR's that will run the RGB nodes.

9 years ago
Forum
Reply
RE: GFCI Tripping - bad power supplies?

My guess would be a bad GFCI. Not a one of my generic PSU's, that i have had for 3 years now, has ever cause a trip.

9 years ago
Reply
RE: Renard 48LSD Dumb RGB Pixel Problems

Those amplifiers are crap. How many nodes per string and how many strings are you running? Drop your illumination ot 75% and you can easily run 100 pl...

9 years ago
Forum
Reply
RE: Having problems using a E6804 and E682 in the setup

6804 needs to start on its own universe, if the 682 is using universes 1-5, then the 6804 needs to start on universe 6, make sure your channels in the...

9 years ago
Reply
RE: Neighbor Trouble

Last year i had one of those freedom from religion jerk offs inform me that he wanted my light show to end as the religious music was intolerant of hi...

9 years ago
Forum
Reply
RE: Controll DMX controller from E682

angus40 wrote:Way to go Jerry . 60 * atta boy's for your success and PMiller for sticking with it ! This was a good thread for my learning . ...

9 years ago
Reply
RE: Controll DMX controller from E682

Works off Xlights as well. I will just leave the pi like that, all my ESP modules will be accessed for testing through xlights.

9 years ago
Reply
RE: Controll DMX controller from E682

I got it figured out, i will have to daisy chain the two controllers instead of having them on separate outputs that way i dont have to change my the ...

9 years ago
Reply
RE: Controll DMX controller from E682

pmiller wrote:FPP uses fseg files that you export from you sequencing software. You can't send data to FPP at the same time FPP is running. I sequence...

9 years ago
Reply
RE: Controll DMX controller from E682

angus40 wrote:try setting the e682 to 170 pixels for each dmx strand and save . then you can pair your start channels as you like . each strand shou...

9 years ago
Reply
RE: Controll DMX controller from E682

Here is my current setup, i have the dip switches set to channel 230 as well. I have tried putting the dip switch to channel 1 and the E682 to channel...

9 years ago
Reply
RE: Controll DMX controller from E682

pmiller wrote:Did you try and use the orange and brown wires for data and ground like it showed in a previous post? Sent from my SM-T710 using Tapat...

9 years ago
Page 2 / 25
Share: