holtm
@holtm
Honorable Member
Joined: May 29, 2007
Last seen: Nov 17, 2026
Topics: 47 / Replies: 417
Topic
Replies: 5
Views: 1723
Reply
RE: Bullet Pixel Burn In

The data is passed from one pixel to the next. Each pixel receives the data stream takes off the bits it needs and sends the rest on. So the data stop...

8 years ago
Forum
Reply
RE: pixel count on Pixel Extender

You mention Renard Protocol with the Extender, I think you meant WS2811? I use WS2811 protocol and have ran up to 350 pixels (1050 channels) from one...

8 years ago
Topic
Replies: 0
Views: 852
Reply
RE: Outdoor Power supplies

There are in-line fuse holders like these They are weather resistant. I use something similar for the pigtails on my outdoor power supply, but I also...

9 years ago
Reply
RE: Christmas 2017 is put away... Boom!

I too took advantage of the weather and some in-town family to take mine down today. It's the third time since I started that it was nice enough and u...

9 years ago
Forum
Reply
RE: Power outage: overload or vandalism???

I put a zip tie on external breaker box, not secure really, but they need to want in a little more than if it had nothing.

9 years ago
Reply
RE: mixing stranded and solid wire

Yes, and the liquid tape maybe overkill.

9 years ago
Reply
RE: mixing stranded and solid wire

What voltage? AC/DC? Are the connections going to be in a weather resistant enclosure? For low voltage, not in an enclosure, solder and adhesive lined...

9 years ago
Reply
RE: AC lights tripping GFCI when it rains.

When I had this problem it was always leakage from the light stands themselves being wrapped around a metal object and staked securely to the ground. ...

9 years ago
Reply
RE: Recommendations on new short song?

You can always cut then length of a song Audacity. I've shortened the Hallelujah Chorus to 1:40.

9 years ago
Forum
Reply
RE: How do I get two Renard boxes to run on the same channels? (two boxes one tree)

The Renards use a serial signal and so a physical splitter should work. However, it doesn't need a device, just something that connects to the wires. ...

9 years ago
Forum
Reply
RE: 2017 PixaBulbs from DIYLEDExpress, wiring layout?

I don't know about the chip, but they are working fine on my E1.31 Bridge and an extender.

9 years ago
Reply
RE: Network Switch outside

I have one in an enclosure with my controller. I power it from a buck converter because it's and odd voltage (not 5 or 12). I ran it for the last two ...

9 years ago
Reply
RE: A Crap moment! Advice on new 3D printer

Ouch! That must have been a heart stopping moment. I like the $599 Prusa i3 MK2/S kit, but shipping is expensive. With all the upgrades (bed leveling,...

9 years ago
Page 2 / 31