Success. Had to write short programs that would turn one on or off at a time and then following the advice in the video, I can use "events" to trigge...
Thanks to all who have answered me on here and I don't feel so dumb anymore since you all are having troubles figuring this out as well. I did find t...
Not sure what you need a picture of, but here is one of the parts mounted inside the plastic junction box I purchased. Fpp does have a way to setup...
Mac computer running Xlights, Raspberry Pi running FPP, SainSmart 8 Channel DC 5V Relay Module for Arduino, mechanical relay, not ssr. I hooked up th...
Can only get things to work with a test program I found. The program sets all channels to high (off) and then sets each individual channel to low (on...
OK, that makes a little more sense. What I am using is the relay board mentioned hooked up to a Raspberry PI3 using the GPIO's, Falcon Pi Player (FPP...
I don't know anything about E1.31. This is the relay I have and I am controlling it with a Raspberry Pi3. If there is a different way I should have...
Haven't tried Xlights test mode. Basically I am unsure of how to set up items or models in Xlights and have been taking educated guesses. I have set...
