Activity
 
Notifications
Clear all
dmcole
dmcole
@dmcole
Noble Member
Joined: Dec 11, 2007
Topics: 62 / Replies: 2134
Reply
RE: Linux software? and lost on a first controller

wrongway1960 wrote:... you should look into a raspberry pi B and run weezy raspi and PiFm ... Just FYI, PiFM produces a great deal of out-of-band in...

11 years ago
Reply
RE: Sound Stuttering In Vixen 3.2 in VirtualBox

m00dawg wrote:... or a Hackintosh ... You should be able to set up BootCamp on a Hackintosh and then load a copy of Win7 or Win8 (I don't think I'd...

11 years ago
Reply
RE: 3 channel dip switch problem

Cayanke: Well, it's good to know the DMX is working. Do you have more than one of the 3-channel controller? If so, are you getting the same results ...

11 years ago
Forum
DMX
Reply
RE: Flickering pixels between segments

Since the problem is occurring at the breaks, it sounds like either a ground or signal problem. When you say you have "them all connected for a commo...

11 years ago
Reply
RE: 3 channel dip switch problem

OK, first, let's make sure you're making DMX out of the Bridge. You should make a little DMX tester ... I always go to the "Big Clive" site for a ref...

11 years ago
Forum
DMX
Reply
RE: 3 channel dip switch problem

*Do you know for a fact you can generate good DMX with your computer? Have you set up other DMX devices successfully? *Whose "test pattern" are you r...

11 years ago
Forum
DMX
Reply
RE: PCB design

I am sticking with DipTrace ... mostly because of the Macintosh version (my desktop is Mac). After looking for part patterns in vain, I finally came t...

11 years ago
Forum
Reply
RE: Komby Wireless Up and Running!

algerdes wrote:Pictures? Diagrams? Full blown "how to"? :naughty: Pretty much everything you need to know is at learn.komby.com If you find any...

11 years ago
Reply
RE: Cat cable recommendation?

Technician wrote:I just install keystone RJ45 jacks on solid wire for long runs. Yeah, I did too until I found those biscuit jacks ... typically a k...

11 years ago
Reply
RE: Hardware for controlling DMX Moving Heads with LOR

Technician wrote:The USB devices tend to work OK when less than a full universe is sent from the likes of Freestyler to stage lights. What he said. ...

11 years ago
Forum
Reply
RE: Cat cable recommendation?

Technician wrote:Use the right wire or fights bad connections. Your choice. What he said. For my solid-wire environments (which aren't always perma...

11 years ago
Reply
RE: Komby Wireless Up and Running!

Yes, feels great to have any technology one hammered upon work, but when signals stream through the air it is especially exciting. Congrats. \dmc

11 years ago
Reply
RE: Hardware for controlling DMX Moving Heads with LOR

Rattataz wrote:What dmcole is saying is that because of the way windows handles USB it would be better to use the Holiday Coro Actidongle or a E1.31 B...

11 years ago
Forum
Reply
RE: Hardware for controlling DMX Moving Heads with LOR

acetm wrote:Oh okay, do you know where I would find instructions on making a cable? Would it just be 5pin to 3pin? The wiki is your friend: If yo...

11 years ago
Forum
Reply
RE: vixen on MAC?

VMware Fusion 7 ‑ Mac OS X - $69.99 Ugh. \dmc

11 years ago
Page 2 / 147
Share: