Activity
 
Notifications
Clear all
davros
@davros
Estimable Member
Joined: Nov 19, 2013
Topics: 3 / Replies: 91
Reply
RE: Mean Well vs Generic Power Supply

Takes quite a bit of research to separate the wheat from the chaff. UL CSA and CE are often faked. Take the UL/CSA number and look it up to see if it ...

8 years ago
Reply
RE: Snow machine outside in winter

Amigorick wrote:It's not the same, but I have a couple of outdoor fountains that I keep from freezing by using electric heaters for fish tanks. I put ...

8 years ago
Forum
Reply
RE: Running pixels at automobile voltage?

The whips look like they are dumb RGB? If they have resistors on each voltage's LED they likely survive ok. Equipment that has its own power supply ...

8 years ago
Reply
RE: Running pixels at automobile voltage?

The automotive environment is not electronics friendly, DO NOT power directly off the supply. Load dumps can generate IIRC 80Vish spikes and other phe...

8 years ago
Reply
RE: SSR failures

What brand is the SSR? Many units with false specs out there.

8 years ago
Reply
RE: Cheap DIY 12mm Pixel/RGB Mounting Strips

Sharpening the end of a pipe can serve as a makeshift punch.

8 years ago
Forum
Reply
Reply
RE: DIY Version of Shimmering Magic

I think has arduino code for this sort of effect, he has reorganized his stuff so I cant directly link/find right now.

8 years ago
Reply
RE: FTP Client recommendation?

Another vote here for using Ninite

8 years ago
Reply
RE: Solder suggestion

I haven't had trouble getting Kester 44 in various diameters from the major distributors-digikey, mouser etc? I'm sure no clean is ok for digital stuf...

8 years ago
Reply
RE: Has anyone used a hobby priced 3D printing service?

Parts arrived- very nice. Close in quality to the service bureau parts I've seen. Will use again.

8 years ago
Reply
RE: Has anyone used a hobby priced 3D printing service?

A work colleague surprised me with a PLA copy Monday morning. With my positive evaluation of that model I did some more digging... Seems 3DHub dropped...

8 years ago
Topic
Reply
RE: How to keep pipe thread from rusting

Teflon tape can make sure you can get it apart.

8 years ago
Forum
Reply
RE: Questions about outlet recently installed

The electrician may not have wired the GFIs in series, I would bet he didn't. An inspector may call a garage a damp location, it is a bit subjective ...

9 years ago
Page 2 / 7
Share: