How to keep pipe th...
 
Notifications
Clear all

How to keep pipe thread from rusting

17 Posts
14 Users
0 Reactions
28.2 K Views
Posts: 94
(@davros)
Estimable Member
Joined: 13 years ago

Teflon tape can make sure you can get it apart.


Reply
Posts: 2507
(@mrgrumpy)
Famed Member
Joined: 12 years ago
idahocampers wrote:good old axel grease!

+1 but add a plastic wrap, then tape to keep the grease off everything else.


Reply
jklingert
Posts: 1767
(@jklingert)
Noble Member
Joined: 16 years ago

http://www.corrosionx.com/electronics.html .

I also use it on all of my electrical connectors...


Reply
rstehle
Posts: 4348
(@rstehle)
Illustrious Member
Joined: 19 years ago

Just a light coat of oil, as mentioned will keep it from rusting. Also makes assembly and disassembly easier.


Reply
jnealand
Posts: 956
(@jnealand)
Prominent Member
Joined: 19 years ago

I have sprayed mine with Rustoleum and before I assemble it I put some vaseline on the threads of both pieces. Works great for me. I have a JUMP pole I built many years ago and I cannot get that unscrewed from the base even after soaking it in wd40 for days (both inside and outside and banging on a pipe wrench with a sledge hammer so you will do well to take it apart every year. I never took the bottom pipe from my base until I wanted to uprade that pole to an ASAP last year. I learned my lesson the hard way. LOL Fortunately the JUMP still works fine.


Reply
Page 2 / 4
Share: