SPOOK1138 wrote:Hi would you be kind enough to advise on which wires need combining on the following controller so that they stay ‘on’Many thanks H ...
Almost all computers have lots of USB ports (front and rear) so try using it on the other ones.
I use PicKit3 programmers on Windows 7 and 10 all the time with no issues. I wonder if the issue isn't Windows 10, but something to do with the USB p...
I'd say a basic test to see if the voltage is correct under a small load and maybe blowing any dust of the visible areas.
When you buy used power supplies it's quite likely that the capacitors in it are degraded. Their purpose is to smooth the power (I'm simplifying here)...
Was the problem power supply new or used?
I make up plastic mesh collars for my tree trunks. They didn't take long to make up. I used square flat pixels zip tied to the plastic mesh. Setup is...
You can buy pixel controllers with a remote control from eBay or AliExpress.
Last year I had issues with water condensing in meteor tubes and suspect it's to do with the large temperature swings and high humidity / rain. After...
Using good quality power supplies would be the first suggestion.
It will also depend on how the E1.31 sender sends the data. It may send the whole universe even if only a small number of channel are used, or it may ...
Some of the cheaper power supplies emit a lot more EMI than the higher spec's Mean Well ones. I have the RS-xxx-x series in my display but the RSP-xxx...
Did you check the ESPixel diagnostic screen to see what the output is?
What brand power supplies do you have?
Here's a video I did about the distance between pixel tubes when I did mine:
