How do I remove 8 f...
 
Notifications
Clear all

How do I remove 8 function controller from light string?

61 Posts
19 Users
0 Reactions
51.8 K Views
Posts: 3
(@spook1138)
New Member
Joined: 6 years ago

Hi would you be kind enough to advise on which wires need combining on the following controller so that they stay ‘on’

Many thanks H


Reply
MartinMueller2003
Posts: 7613
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

Need a bit more data.

How many "strings" of lights are there?
Do the individual lights support multiple colors?
Have you measured the voltage on the strings when they are full on?
What does the other side of the PCB look like?

The picture leads you to believe there are either 2 or 3 strings of lights. Two of them have the controlling devices on the front of the board. There is a third pad with no controlling device. Is that the common line?


Reply
Posts: 3
(@spook1138)
New Member
Joined: 6 years ago

Hi,.. wow.. omg... erm.. these are icicle lights.. not multicoloured...
I can’t measure voltage as I’m a complete novice..
The rear of the pcb is blank.. does this help..


Reply
David_AVD
Posts: 991
(@david-avd)
Noble Member
Joined: 17 years ago
SPOOK1138 wrote:Hi would you be kind enough to advise on which wires need combining on the following controller so that they stay ‘on’

Many thanks H

Join the 3 solder pads I have indicated in the photo.

MFC

Reply
Posts: 24
(@holtzj)
Eminent Member
Joined: 17 years ago

Looking for a thread related to atomi smart lights 2nd gen https://www.amazon.com/gp/product/B08N55GNKL/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&th=1
I would like to have better control then the 8 functions. Computer controlled would be nice. I recall that an issue years ago (10 plus years) was hardware could be built but protocols were change too quickly.

My dream would be to control each light and each pixel(rgb), one can dream right.


Reply
Page 11 / 13
Share: