HI there,
I have been following this thread trying to remove or bypass the 8 function multi-controller for the lights I have here... https://www.amazon.com/gp/product/B08C2R6VFK/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
I would like them to just turn on and off only. They are only one color (white) and there were only 2 wires coming out of the controller when I took it apart. Any advice would be greatly appreciated.
jamesmmiller wrote:HI there,I have been following this thread trying to remove or bypass the 8 function multi-controller for the lights I have here... https://www.amazon.com/gp/product/B08C2R6VFK/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
I would like them to just turn on and off only. They are only one color (white) and there were only 2 wires coming out of the controller when I took it apart. Any advice would be greatly appreciated.
This product link points at a non adjustable product. It has a PSU but no "functions".
Sorry, are you referring to the Amazon link to the lights I have purchased? The lights I have are connected to a small controller with a button I can press to cycle through different animations (blinking chasing etc) How can I remove or bypass that so they just turn on and off when power is applied?
Thank you so much for getting back to me. Sorry, are you referring to the Amazon link to the lights I have purchased? The lights I have are connected to a small controller with a button I can press to cycle through different animations (blinking chasing etc) How can I remove or bypass that so they just turn on and off when power is applied?
Do they remember last turned on value? Then you can just connect them to a renard. But since you already cut off the controller, likely you will need a 30v power supply and connect that directly to whatever wires you have. I DO NOT HAVE these lights and so you could blow them up. But the power label said they are 30V DC lights. Often, there is protocol running under the voltage output that is sending "dots and dashes" and a slight bit of logic on each light that interprets the dots and dashes.
How are the LEDs wired. Two wires in and two wires out with 2 wires for power injection? Or are they wired every other?
