Interference helps
 
Notifications
Clear all

Interference helps

7 Posts
4 Users
0 Reactions
2,902 Views
Posts: 7
 Wali
Topic starter
(@wali)
Active Member
Joined: 7 years ago
[#53493]

Hello everyone, I need help because I have had complaints from firefighters because my lighting installation causes a lot of interference on their communications. An official communications agency ordered me to turn everything off and I will be fined.

On a spectra analyzer, I actually noticed that as soon as I turn on a system with ws2811 or 2812 leds, I disturb the entire 500kHz to 1Ghz band as can be seen on the video. Even the leds off, as soon as there is a signal on the data line, there is noise. I specify that the food is healthy (without noise)

Video link https://drive.google.com/file/d/1rYDlhyyKCbWw0ep7v1JwazAszGKKMxZ_/view?usp=sharing

One more thing, the fire station is located 300 meters away

Can you help me ? Should I filter? I am so sad that everything is turned off :pleurer: .

thank you in advance
Steve


6 Replies
Posts: 401
(@kensington)
Reputable Member
Joined: 11 years ago

The interference is usually caused by whatever is driving the LEDs. Try a choke or some ferrite beads on the line from the controller to the LEDs and see if that helps.


Reply
David_AVD
Posts: 991
(@david-avd)
Noble Member
Joined: 17 years ago

What brand power supplies do you have?


Reply
jchuchla
Posts: 8698
(@jchuchla)
Illustrious Member
Joined: 15 years ago

I fear you're not likely going to come up with a workable solution. This is the same issue that causes many of us to have problems with garage door openers. You'll find that the RFI is coming from the entire length of the pixel lines. PWM switching of LEDs is noisy. Shielding ALL of the pixel lines would probably help, but that's not a very practical solution.


Reply
David_AVD
Posts: 991
(@david-avd)
Noble Member
Joined: 17 years ago

Some of the cheaper power supplies emit a lot more EMI than the higher spec's Mean Well ones. I have the RS-xxx-x series in my display but the RSP-xxx-x are the newer version. I don't know if the lower lost LRS-xxx-x series have the same filtering.


Reply
Page 1 / 2
Share: