Activity
 
Notifications
Clear all
cschristmas
@cschristmas
Active Member
Joined: Dec 15, 2017
Topics: 0 / Replies: 9
Reply
RE: ESPixelStick Versions

Firmware can be found at github.com/forkineye I believe the latest (3.0?) firmware should work on all the board revisions... Sent from my SM-G975U u...

7 years ago
Reply
RE: E682 colors are not right

Sounds like your color order is off with the new 682. Double check it matches with the old one. Sent from my SM-G975U using Tapatalk

7 years ago
Reply
RE: Planning next year

Here's some pics from when I built mine and what they look like when done Sent from my SM-G975U using Tapatalk

7 years ago
Reply
RE: Planning next year

1/2 inch PVC pipe, with 12mm holes drilled every 2 inches, and the bullet style pixels pushed in from the back... East to setup every year, easy to r...

7 years ago
Reply
RE: Operating Temperature

Currently 29.8F outside in Canton, Ohio... yours seem just a little bit high to me... I have ventilation and fans on my enclosures. Custom built using...

7 years ago
Reply
RE: Cannot add more than one E1.31 output on Falcon Flayer v3.5.6 (v3.5 branch)

Enter the output count. Then tap set. And then save. If all of the outputs are still showing, enter all the details and hit save again. Sent from my...

7 years ago
Reply
RE: Power Supply Equation

The general rule of thumb is 0.3 watts per pixel at full white brightness... multiply that by number of pixels and voltage to get the required watts a...

7 years ago
Reply
RE: HELP!! F16V3 and Xlights

Are you injecting power anywhere in the strand of 750? Even when only running them at 40%, it sounds like you are getting a voltage drop below the acc...

7 years ago
Reply
RE: Sequences not working

Your F16v3 and xlights are set to use universes 100 thru 124, but the FPP Pi is only outputting universe 100 via E1.31 (only part of your mega tree wi...

7 years ago
Share: