James I don't see my name on the latest spreadsheet, I'll take 40 as it looks like that is still included in the $6 shipping
I'll take 36, unless you can get a few more in the $6 shipping bag. I thought I read you could get 40 in a tyvek bag.
Ran another test last night. Loaded old firmware ran 2 sequences then loaded the new firmware and ran the same sequences. Results: With the current...
It looks like it is working with the new firmware, I ran three sequences and they did fine. I'll try to load the old firmware back on it and test aga...
I had a problem with my RPM bridge this year too. I had it set up using 3 outputs on Renard, 1 to my mini trees, 1 to my mega tree, and 1 to another ...
dlovely wrote:Alright took the afternoon off work today to test some things out as this was really bugging me. (Oh don't feel too bad, Wife was sick s...
I had success with using an ST485 chip to send out DMX with a E680. I used basically the same circuit, just without the cap or resistor.
Thanks. I figured it was due to voltage drop but was supprised to see it be better as soon as I connected v+ and didn't change when also connecting g...
timon wrote:If however your only running one PS you can power inject without isolating the +V and thus feed a string from both ends. The positive side...
This is what I used to make a dipole antenna. I stripped back about 2.5 feet of the outer insulation and then pulled the inner insulation and center ...
I had tried David_AVD's tool and also SACNview. This morning i tried vixen and it was working and It now also works with both of the other programs...
I had problems with the ge lights if the distance to the first pixel was more than about a foot. The first pixel would get the wrong start address.
sebjsan wrote:cessnapilot- I dont know if its too much trouble for you but can you post the links to what you used/ have to build your HTPC. Sure, N...
I just built an HTPC for about $80 (I had a couple coupons for microcenter). I did have the power supply, case, and USB TV tuner. At idle its about 3...
