thg wrote:Just want to make sure i have this correct before powering them up. Red wire-DC5volts White wire-Data Green wire-Clock Blue wire-Ground. T...
CaptKirk wrote:Is that really a universal capability? It seems like many of the Renard projects do not do DMX... I was under the impression that it...
Another option is to have the E68x setup to DMX on one of the groups and load the DMX firmware onto the Renard controllers.
I have the E680 and have noticed that if the E1.31 controller is activated in vixen then I get constant data to the E680 controller. You can stop the...
Phil, Thanks for the videos. It really help on a few areas I was stuck. One thing to add, when you were trying to do the bulk rename for the nodes,...
I was unable to get the dmx module working hooking it up almost directly to the controller. If I hooked up Data on the E680 to Data+ dmx module and...
I was unable to get it to work with the DMX module without the RS485.
I am using the dmx module from holidaycoro. I have the E680 running the native dmx code, to the first cluster. On the first pixel output connector I...
Today I tested the RS485 chip with about 120 feet of cat5 cable and everything ran fine. Jim, Will the new boards have mostly the same parts as the E...
cessnapilot wrote:Jim, I have a couple questions I have the E680 but with the old firmware, what are the options for upgrading it to the new version w...
Awesome, I think I will be able to make it this year!
Donny M Carter wrote:... I can then run my Renard64's (w/dmx programming) daisy chained.... I believe you can set it to output Renard protcol too so...
I ordered 10 from one store at $1.88 so far 7 have shipped from 4 different locations, we'll see if I get the other 3 or not:)
I had trouble with the GECE strings this year with the E680. If the first pixel was more than about 1-2 feet away from the controller the first pixel...
It also looks like a great way to mount them!
