3D Bethlehem Star
 
Notifications
Clear all

3D Bethlehem Star

36 Posts
23 Users
0 Reactions
25.8 K Views
wbuehler
Posts: 622
(@wbuehler)
Honorable Member
Joined: 19 years ago

Nice How To

Bill


Reply
Posts: 187
(@stevemaris)
Estimable Member
Joined: 16 years ago

Great "how to". I am in the process of making one right now. Buying the steel from a home depot or similar store is a waste of money. A 3 foot section was 3 dollars. I found this place that has good prices. I went to the store that was 15 miles from my house, but they also ship. I will post pics when i am done.
http://www.metalsupermarkets.com/


Reply
budude
Posts: 10400
(@budude)
Illustrious Member
Joined: 18 years ago
SteveMaris wrote:Great "how to". I am in the process of making one right now. Buying the steel from a home depot or similar store is a waste of money. A 3 foot section was 3 dollars. I found this place that has good prices. I went to the store that was 15 miles from my house, but they also ship. I will post pics when i am done.
http://www.metalsupermarkets.com/

Thanks for that link - never heard of these guys but found they have a place only a couple miles from my work - sweet!


Reply
Greg in Canby
Posts: 854
(@greg-in-canby)
Prominent Member
Joined: 19 years ago

I often visit links posted here and am disappointed as they usually are not around Oregon.

One here in Portland, five minutes from my workplace!! WOOHOO . . . thank you for the link!!

Greg


Reply
Posts: 187
(@stevemaris)
Estimable Member
Joined: 16 years ago

Good deal!
Funny thing is I searched online ( for hours) for a retail metal shop and found no small order places. I open the yellow pages,(first time in years) and there it was.


Reply
Elmo2resc
Posts: 265
Topic starter
(@elmo2resc)
Reputable Member
Joined: 19 years ago

I order all my stuff from a local metal supply. It is the only way to go. You pay way to much at home depot. I stopped using steel, It was a pain to clean and paint. Steel always seems to rust. Now I am using Aluminum, it is a little bit more but worth it.


Reply
griffixdc
Posts: 2512
(@griffixdc)
Famed Member
Joined: 16 years ago
Elmo2resc wrote:I order all my stuff from a local metal supply. It is the only way to go. You pay way to much at home depot. I stopped using steel, It was a pain to clean and paint. Steel always seems to rust. Now I am using Aluminum, it is a little bit more but worth it.

not to mention lighter and well does not rust :)......the star was a lot dimmer than the normal beth star but thats because it had this cool feature you created depth (3d)it actually looked 3d when lit so wonderful job.......what method are you using to weld the aluminum together?


Reply
kychristmas
Posts: 3955
(@kychristmas)
Famed Member
Joined: 18 years ago

I love aluminum, but the price is not the only consideration. Welding it requires a great more skill. For wireframes and most of the stuff we do, a Cheap flux-core welder works well enough. A friend tried to show me and I just don't have the patience. It also seems to require much better equipment.

How do you weld aluminum?

Elmo2resc wrote:I hadn't really thought of doing more channels on the star. That is a great idea wayne. For next year though, LOL. I will get some video out soon of it. It looks pretty good up on the roof from all angles. When I first lit it up in my living room I thought it looked to busy. Up on the roof it looks completely different. I have just been so busy trying to get the show up I haven;t had time to post. Due to a wind storm last week and using upper fence post for my mega tree (wasn't a good idea for the tree I built), I was busy rebuliding it all week. Looks like tommorrow will be the day.
Jerome

Reply
griffixdc
Posts: 2512
(@griffixdc)
Famed Member
Joined: 16 years ago
kychristmas wrote:I love aluminum, but the price is not the only consideration. Welding it requires a great more skill. For wireframes and most of the stuff we do, a Cheap flux-core welder works well enough. A friend tried to show me and I just don't have the patience. It also seems to require much better equipment.

How do you weld aluminum?

lots of gas....lmao ! 🙂


Reply
Matt_Edwards
Posts: 2664
(@matt-edwards)
Famed Member
Joined: 18 years ago

I too believe Al TIG welding is hard. Never tried personally as I don't haven't got the right equipment. My brother in-law is OK at at though.

An easier way is Al brazing. It is easy as, even I get good results. I used it to fabricate exhaust pipe for my model boats.


Reply
Page 3 / 4
Share: