Hello fellow DIYers!
My brother-in-law asked me if I could help fix one of his cordless telephones, so I cracked it open and came across a component that I am unfamiliar with. As this component was the only one that was cracked and only one leg was still soldered I believe this to be the culprit. I want to say that it's an inductor, but I am probably wrong. I am not sure what the value of the component is either. Any help on identifying the component and value of it would be greatly appreciated.
Could be a mini-flux capacitor!
(sorry... other than the smarta** remark, I wish I could offer some actual help!)
Definitely looks like some type of coil or inductor. Values are usually in "Henrys" I think or microHenrys. uH is the abbreviation, I believe.
Hi:
The schematic symbol may represent an inductor on a ferrite core. The inductance may be 100 nanohenrys or .1 microhenry, which is a very small value. It could be 100 microhenrys, which would be more common when on a ferrite core.
What does the rest of the schematic look like? In other words, what is it connected to? If we could see the schematic and how it is used, it would be easier to identify it.
I thank the # 100 is the value and that it decodes like a SMT resistor i.e. 103 is a 10K resistor so 100 works out to 10 ohms if a resistor, so i thank it is a 10 microhenrys. But i'm not 100% on that can't find a good reference.
My geuss is a ferrite core inductor. 100 somethings is about right.
The rest of schematic is helpful as is a photo of the actual component and board. add a match stick for scaling ( or something else super common)
