Less than a beginne...
 
Notifications
Clear all

Less than a beginner needs help

10 Posts
8 Users
0 Reactions
2,775 Views
Posts: 4092
(@skunberg)
Famed Member
Joined: 18 years ago

I agree, an SS8 or SS16 is a good place to start. Wayne has the kits. Message him about what's in stock. In the mean time you should look into software to run your show. Vixen 2.1, Vixen 3, Xlights, HLS are a few to look into and you can start using them before you have the controller. The Wiki is your friend, lot's of good info there.


Reply
Posts: 3
Topic starter
(@jmkjmk)
Active Member
Joined: 11 years ago

I think I'm about to get hooked. Thanks everyone.


Reply
Posts: 188
(@harpster)
Reputable Member
Joined: 17 years ago

Hi Jim - I'm in South Charlotte area... I'm using Renard SS 8. 16, & 24 controllers and Vixen 2 for sequencing. If I can answer any questions for you let me know. -Alan


Reply
Posts: 40
(@keyman6868)
Eminent Member
Joined: 12 years ago

Jim there is another way- 8 channel controllers for plugging in a sting of lights. It is the easy way with dimming. http://www.seasonalentertainmentllc.com/store/en/ac-lighting-controllers/195-xexp8-assembled.html#/
you would also need a dongle. If you do go this route make sure you have the instructions up and read before plugging anything in.

I know it is not very well done but it was my first show ever and the kids on Halloween loved it!

I just hate doing the sequencing! Im not good at it at all. For the video above I used Light Jam software. But Im working on my vixen 3 now!


Reply
yohan
Posts: 85
(@yohan)
Trusted Member
Joined: 13 years ago

Jim,

If you are wanting to get something started now as Christmas is fast approaching, I have provided the following where posters offered Renard controllers for sale.

You will need to PM the poster to see if they are still for sale.

1. This poster is selling SS24 board with 6ft pigtails and SS16 with 1ft pigtails. No enclosures on both: One SS24 and one SS16

2. This poster is selling a SS8 with case: Renard-SS8-Assembled-CG1000-enclosure

3. Then if you want to solder and build it yourself, here is WayneJ here you can buy a complete kit: SS-Renard-Kits-Now-Available


Reply
Page 2 / 2
Share: