Hi everyone. I want to start out by making it very clear I am less than a beginner. It took me 10 minutes just to figure out how to make my first post. I'm trying desprately to figure out how set up my first simple light show for my 3 year old grand daughter. Yes, I'm old.:( And even though I've bene using a computer longer than a lot of you have bene alive, electronics is not my thing. I still remember burning up a trasnformer in a lab al of the mechanical engineers had to take about electronics. Needless to say the professor split up me and my partner. I've read a lot of the threads and quite frankly most of you scare me. I can't understand nearly anything anyone is talking about. So here is what I'm looking for. I'm really good at following simple directions and building stuff. So I was hoping to find a real simple cook book style tutorial, maybe in video format (I'm a visual learner) that would walk me through setting maybe a 4 channel display. I was thinking perhaps building 2 PVC curved racks to hang the lights on and a straight one that would have a star on top. The lights would run up and down the curves then up the pole and the star would pop. I know, kid stuff for you guys. But if I can pull this off I would be a hero and I would start to learn the basics. Now if no one wants to reposnd I completly understand. But if you can help that would be great. I have a couple spare computers, a few old power supplies, a soldering gun or 2, and a radio shack just down the road. And I at least can handle the simple AC supply part of it. Its when we get to the solid state relays and control boards I need to be spoon fed (see I've a least learned some of the terms). Just think of this as a challange to see if you can teach a 60 yar old mechanical engineer whose only C was in electrical courses.
Thansk in advacne for the help.
Jim
Hello Jim and welcome to the forum. You might change your profile and add your location as there may be someone in your area that can help you.
You would probably be looking at an 8 channel controller to get started. Not sure of any 4 channel ones out there but there might be. You can get a kit for the SS8 and build it.
A good soldering station is really needed. You also my find someone who has an extra controller and buy it built. Then it is off to the wiki to learn how to use it. Pretty simple controller to use. You just have to download a sequencer and sequence the music or a sequence without music if you desire. Be forewarned that once you get your first controller you will be hooked. Ask questions here and you will find a ton of information that is helpful.
Good Luck
Terry
Hi Terry. Thanks for resposnding so quickly. I updated my location. I'm in Charlotte, NC. And you busted me already with the 4 channel thing. Thanks for being so nice about it. I'll definitely look at the SS8. And I'll convert my stained glass soldering station to my new hobby station. And I won't use that soldering gun. Its 100 watts and probably a littel to powerful. I do have 2 other ones for soldering wires. It might take me a little while to get started but I'll definitely let you know how I make out.
Jim
what you can do like a lots of us did ,,,get yourself a 6 or 12 mr christmas .. and just plug your ligh into it ,, it has pre build sequence and flash to it ,,,it is not perfect but it will get you going for this year ,,, then you can take the your time and learn about ligh ect and have a bigger show next year ,,, cheer
it look like this
http://www.amazon.ca/Mr-Christmas-Lights-Sounds-Outdoor/dp/B000K4R8VU
maybe you can find them in your local area ,, cheer
There's also the light o Rama route. These are packaged systems with software that is great for beginners and those that don't want to get into the technical side.
--Jon Chuchla--
Sent from my iPhone using Tapatalk
