Just getting starte...
 
Notifications
Clear all

Just getting started

18 Posts
7 Users
0 Reactions
6,690 Views
jklingert
Posts: 1767
(@jklingert)
Noble Member
Joined: 16 years ago

You still need a data output from your pc such as a RS 232 (serial port) or a RS485 dongle to talk to the renard controllers. While they use cat5 cables, they are not ethernet connections. See the wiki. http://www.doityourselfchristmas.com/wiki/index.php?title=Renard_Data_Cables


Reply
Posts: 20
Topic starter
(@copterdocc)
Eminent Member
Joined: 12 years ago

Okay! Okay! That is probably the thing I got with the really great starter kit I got from Wayne J! It even says RS485 on it!
DUH! I do not know who is smarter .....me or the pumpkins I am trying to make sing!


Reply
Posts: 20
Topic starter
(@copterdocc)
Eminent Member
Joined: 12 years ago

Thanks for all the help and the rapid response!!!


Reply
Wayne J
Posts: 7789
(@wayne-j)
Illustrious Member
Joined: 19 years ago
copterdocc wrote:Okay! Okay! That is probably the thing I got with the really great starter kit I got from Wayne J! It even says RS485 on it!
DUH! I do not know who is smarter .....me or the pumpkins I am trying to make sing!

Yes, that is the RS485 dongle. :thup: The usb cable is also included and the cat5 adapter as well. 🙂


Reply
Posts: 20
Topic starter
(@copterdocc)
Eminent Member
Joined: 12 years ago

I have everything connected, still no blinky, flashy! Downloaded the driver and filled and set the serial port configuration.
At one point I could see the green LED blinking but it did not seem to make a difference. Should it be? I am trying to find the baud setting
for V3.1. I left it at 57600. Is that correct?


Reply
Page 2 / 4
Share: