Just getting starte...
 
Notifications
Clear all

Just getting started

18 Posts
7 Users
0 Reactions
6,689 Views
Posts: 20
Topic starter
(@copterdocc)
Eminent Member
Joined: 12 years ago
[#33003]

Was very impressed with how fast I received the SS24 and Starter kit I ordered from Wayne J!!
Ordered a Pickit this morning before I realized the PIC's are already programmed.
Still working through the VIXEN programming. Is there anywhere on the site that
would be the best place to start?


17 Replies
Posts: 268
(@jakeleg1969)
Reputable Member
Joined: 17 years ago

Most people start with the "wiki" at the top of the page..

Welcome aboard...


Reply
Wayne J
Posts: 7789
(@wayne-j)
Illustrious Member
Joined: 19 years ago

Vixen "How To" videos.....

http://www.doityourselfchristmas.com/wiki/index.php?title=Vixen_How-To%27s


Reply
james70818
Posts: 2045
(@james70818)
Noble Member
Joined: 19 years ago
copterdocc wrote:Was very impressed with how fast I received the SS24 and Starter kit I ordered from Wayne J!!
Ordered a Pickit this morning before I realized the PIC's are already programmed.
Still working through the VIXEN programming. Is there anywhere on the site that
would be the best place to start?

Welcome to the insanity! Even with the PIC's already programmed, it is always good to have a programmer on hand just in case!

James


Reply
Posts: 20
Topic starter
(@copterdocc)
Eminent Member
Joined: 12 years ago

Thanks,
Have got the board built and have done all the diagnostics. All checked out ok. Have hooked up some lights and am trying to run a sequence.
I have nothing. I am using Vixen 3.1, (It is great, easy to program) and am using the Cat 5 to connect to the Renard SS24. What am I missing?
Like I mentioned I did all the testing in the new beginners setup guide and all was good. I have JP1 installed. I have looked at 3.0 tutorials and they talk about setting up the com port. Do I still have to do that with the Cat cable? If so where? I am still looking through the forum and wikki but thought I might get a quicker answer here
thx


Reply
Page 1 / 4
Share: