I have been looking at Vixenlights but no help there as far as connecting to the renard
Yep traneman is great. It was just a few months ago when he was in the same boat as you, now he's happy to pass on the knowledge.
Vixen 3.1 is the latest and greatest version of vixen 3. If you're using vixen 3, that's the version to use. If you prefer vixen 2, version 2.1 seems to be the most popular. It's worth noting that vixen 2 and vixen 3 aren't really different versions of the same program, they are two completely different programs. The only thing they have in common is the name, the original developer, and that they both control lights, beyond that, they're completely different.
We don't really go too much into hardware setup in the vixen documentation. We kinda make the assumption you know how to use your hardware. That is something we should improve a bit.
It would help us to guide you if you post a few screenshots of your display setup screens.
-- Jon Chuchla --
Sent from my iPad using Tapatalk
Thanks guys
I do understand the hardware.....sort of. Like i said earlier i am an electrcian by trade so i do understand electricity.
I will get some screen shots.
This is everything I have sent to Traneman,
I am using 18 channels on the Renard. I patched these to the 18 elements I created. these are standard strings of incandescents. 3 lights to the string, some have 1. 18 total. I set up the color handling as a single color, white in color.
I have 12 patched channels for pumpkins and 6 patched for skulls. Everything works great in the preview. I have used
the "find the outputs attached to theses elements" and all comes up as it should, the channels they are attached to on the Renard.
In the Serial Port Config I have
Port name........3
Baud rate.......57600
data Bits.......8
stop bits.......one
I am not using a serial port but I guess that is what It is labeled.
These are the same settings I have on the Com port 3 in the device manger
When I set the settings the Green LED on the RS45 starts flashing. I assume it is communicating.
The SD LED does not light up as it should if the Renard is receiving data from the Vixen.
I have done all the test in the Beginners Start up guide and all of the LEDs light up and all of the lights I had attached to the outputs lighted also. Tests such as jumping 14 to 13 on U6 and so on. I have done all 3 PICs with no problems.
I am wondering if the oscillator, U4 or U5 are did. I ordered 2 of each today. Should be here Friday.
That is about all I can think of.
Thanks for all your help!
